HMK 102B SUPRA
SUPRA Series meets your expectations
HMK 102B SUPRA
Engine
6-Forward 3-Reverse Fully-Automatic Transmission
6-forward 3-reverse fully automatic transmission used in the SUPRA Series allows smooth driving.
in the 5th and 6th gear.
MSS (Motion Stabilizer System)
The optional MSS (Motion Stabilizer System) works as a shock absorber on the loader lift cylinders. By damping the shock that occurs when a full loader bucket is used on rough terrain, it provides a comfortable ride that is not only smooth but also fast as well.
Heavy-Duty Type Axles
Heavy-Duty Type Axles have been used in the SUPRA Series in scope of both load carriage and durability.
HIGH EFFICIENCY, SMART CHOICE!
Load Sensitive Piston Type Hydraulic Pump / Flowshare
The optional piston type hydraulic pump provides load sensitive hydraulic power as much as the operator needs with precise control independently from the amount of the load and engine rpm. It works with efficiency up to 95%.
The optional FLOWSHARING valves provides excellent hydraulic control independently from the amount of the load and operator’s skills for various field works such as pipe lying and channel trenching.
It allows simultaneous boom, arm and bucket motions even in the low rpms and provides the opportunity of working in noise restricted areas such as hospital, school and city center.
Flow Charging Valves
As an optional equipment, flow charging valves with extra regeneration feature applied on the boom and arm lines provide more efficient hydraulic power and prevent cavitation.
LSD: Limited-Slip Differential and Differential Lock
The highest traction force is provided with LSD (limited slip differential) acting on front axle and
In SUPRA Series, operator may easily check gauges through LCD screen put on the front and rear area while he is sitting in the loading and excavation position. Thus, the operator may easily check the gauges without taking his eyes off the driving direction. This working position allows operator to work for longer periods without suffering from neck and back aches.
LEAVE TOUGH WORKS TO SUPRA!
SUPRA Series for the toughest working conditions
TIPSHIFT (Forward-Reverse Direction Control)
Forward-reverse direction control on front loader control lever TIPSHIFT
In conventional loading works and manoeuvrability in limited spaces, the operator apply both loader and forward-reverse commands from a single point without losing steering wheel handling by using the TIPSHIFT button.
It provides occupational safety and comfort that operator uses it without breaking the contact with steering wheel and loader controller.
All these fine details and innovations have been thought for you to make saving on time and operation costs.
Excavation, Removal or Crushing Works…
SUPRA Series excavator group provided and designed for tough
Rear joysticks that are optional in SUPRA models allow for easy
Cushioning system in the excavation cylinder softens the movements at the ends of strokes, absorbs the impacts and prolongs the machine life.
Telescopic arm that has digging depth up to 5.80 m. provides an advantage in deep excavations and the works that require long reach.
Engine
Brand Perkins
Model 1204F-E44TAN Diesel Engine
Number of cylinders 4
Bore & Stroke 98 x 120 mm
Displacement 3621cc
Maximum Power 74.4 kW, 100 Hp @ 2200 rpm
Maximum Torque 430 Nm @ 1500 rpm
Hydraulic System
Pump Type Simple, reliable and high-efficient tandem gear pump
Pump Flow Rate 91,5 L/min @2200 rpm
System Pressure 255 bar
Transmission
Type Autoshift
Number of Gear 6 forward – 3 reverse
Stall Ratio 2.38:1
Driving Speeds
1st Gear 6 km/h
2nd Gear 9 km/h
3rd Gear 12 km/h
4rd Gear 20 km/h
5th Gear 28 km/h
6th Gear 40 km/h
Loader Performance
6-in-1 Bucket Capacity 1.1 m³
Max. bucket breakout force 8270 kgf
Max. loading arm breakout force 7427 kgf
Lifting capacity to maximum height 3687 kgf
Digging Performance
Bucket Capacity 0.18 m³
Max. bucket breakout force 7021
Max. dipper breakout force 3161
Filling Capacities
Engine Oil Pump 10 lt
Engine Cooling System 16 lt
Fuel Tank 140 lt
Hydraulic Oil Tank 70 lt
Operating Weight
Standard Machine 9240 kg
ATTACHMENT FOR BACKHOE
Quick CouplerProvides to change buckets and attachments hydraulically. Provides less effort and less time for the operator to change buckets and attachments. Increase productivity.
Hydraulic Breaker
Auger
Two hydromotor flowrate option 202 cm³/rev and 132 cm³/rev 4 different diameter option 230mm, 350mm, 490mm and 610 mm
Orange Peel Grapples
Hydraulic rotation and no-rotation models are available.
0.234 m³ capacity.
Ditch Maintenance BucketDrenaige holes reduce weight of the load by charging water inside the bucket.
1500mm Bucket weight, 0.2 m³ Bucket capacity
Tilting Grading BucketHydraulically operated grading bucket allows the bucket to turn 91 degree leftside and rightside.
0,227 m³ Bucket Capacity
Dedicated BucketsDedicated buckets are available in a variety of widths (350mm, 400mm, 500mm, 600mm, 700mm, 800mm and 900mm) Thick cutting edges and side plates offer superior durability.
Taper Ditch Buckets45 Degree taper angle 0.148 m³ Bucket capacity
0,273 m³ Bucket capacity
RipperReplaceable tip for even longer service life
ATTACHMENT FOR LOADER
Quick CouplerProvides to change buckets and attachments hydraulically.
Provides less effort and less time for the operatör to change buckets and attachments. Increase productivity.
Pallet Forks Kit For Loader Bucket
The Bucket mounted forks allow pallets handling without damage to the material on the pallets
1050mm Forks length
General Purpose Bucket
Designed for maximum durability
1.1 m³ Bucket capacity
Multi Purpose Bucket For Quick Coupler
Suitable with quick coupler.
1.1 m³ Bucket capacity
Fork Mounted Quick Coupler
Forks without bucket provides easier and faster usage.
More visibility and easy working according to the bucket mounted Forks
Auger For Front Bucket
Two hydromotor flowrate option 202 cm³/rev and 132 cm³/rev
4 different diameter option 230mm, 350mm, 490mm and 610 mm
2 Axis Snowblade
2800mm Blade width, 70 degree horizontal movement, 25 degree vertical movement
Snowblade
2800mm Blade width 22.5 degree vertical movement
